Search the Community
Showing results for tags 'sensivity'.
Found 20 results
-
Hey sorry if this isn't the right spot for this, it's my first post. I use 20 sensitivity/800 DPI in Battlefield but moving up to 1600DPI since I got a new mouse. I've noticed that when I type 0.020 sensitivity 800DPI to 0.010 1600DPI it goes from 19cm to 16cm even if it supposed to be half the original sensitivity since it's 2x DPI. I am not sure if this is a bug with the calculator/converter or a problem with Battlefield games themselves and the way it measures DPI. Any clarification and help would be appreciated, thank you in advance.
-
how do you edit fortnite sensitivity from save file? is it possible or did they removed it? i wanted use this sens 0.0171467147 but its sens that needs to be entered in the savefile cfg but idk how to do that
-
Im kinda confused how to setup the calculator so the scopes in both games match. In Warzone 2 im playing with this: 1920/1080 24(23,8) inch Monitor Relative Affected ADS Multi 1.0 800 DPI 5.15 sens 103 FOV Monitor Coefficient 1.78
-
I'm trying to convert my aim but I'm guessing because warzone lets u have a 120 fov and r6 only lets u go to 90 my aim just feels weird anyone have any tips or ideas that might help 👁
-
Hi, could you guys tell me if im right so if you have a scoped for exemple Overwatch (widowmaker) sens : 37.89 do you have to put 0.3789 in Kovaaks "zoom Sens Multiplier" ?
-
Ive been using this calculator for a few months now and ive been trying to figure out how to properly convert ads sensitivity from one game to another. From what I understand, hip fire to hip fire between games is best converted using the 360 degree distance setting. Like I did below for RS2 to RO2. However, when I tried to learn how to do this for ADS to ADS between games I was confused between vertical/horizontal distance, 360 distance, etc. I understand the basics like horizontal distance is only viable when measuring across the equator since measuring at other points would lead to distortion. Same for vertical I guess. If im correct the reason you can't use 360 distance to convert from ADS to ADS is because the ADS FOV values are different between games? For example in RO2 ADS FOV is 52 while ADS FOV in Rising Storm 2 is 57.492909. Although even this is confusing because if I match up ADS to ADS with the 360 distances match i have the same turn amounts for both games in ADS. And isn't that what I want? Same amount of mouse movement between games? From what I have read on forums it seems that 0% vertical distance is the best but im not exactly sure why this is. And if so, would using 0% vertical distance be a good way to convert from ADS to ADS between games? Below I posted a second image to see if I did the ADS to ADS conversion right. Sorry for rambling but I just really need someone to explain this to me in a clear way because it seems the more I try to understand this stuff the more confused I get.
-
Hello everyone! I would be very happy if someone helped me get out of this situation. So I have converted my Normal R6S Sensivity to COD Warzone Sensivity from your site and my siege sens is: 11 Converted COD:Warzone Sens is: 9.54 Im fine with my main sens converted to warzone but the ads sens is the one I can't figure out! After Shadow Legacy siege had bunch of new optics wich zoom and because of that a bunch of new ads sens settings. I will go ahead and type all the new ADS Settings i have on siege and can someone convert that to warzone please? Thanks! Mouse ADS Sensivity: Advanced Standard ADS Sensivity: 71 1.0x Magnification: 50 1.5x Magnification: 83 2.0x Magnification: 85 2.5x Magnification: 86 3.0x Magnification: 87 And 4.0x is 88 So there is only 2 settings for ads in warzone seems like Low zoom and high zoom and what will i have to input over here? Thank you again!
-
valorant Csgo to Valorant Sensitivity conversion is wrong
SZ123 posted a topic in Technical Discussion
It is well explained in this post , Admin please look into this , as even i feel better with this method of conversion before i was overshooting alot , i came from csgo (Lem) so i could tell something was off in the sensitivity , it was higher , correct value of conversion is csgosens / 3.3735 idk about the 2.5x scope conversion tho Admin please test and check and make changes accordingly Thanks for reading -
Hi all, and sorry if my topic is in the wrong section.Well my problem is that i cant calculate my sens right. So the problem is that im a R6 player with sens hipfire 10\10 and ADS 83 for all scopes.Im very used to this and i want to conver it to games like BFV CoDMW. I read all the intructions,and to be honest i broke my brain completly.Could someone help me with this.Would be very appreciated.(The thing is that i like my hipfire sens in ADS mode) And yeah i read about UsA in BF series.But the thing is that ADS sens with UsA on,is lower than hipfire and i dont like this.My sens in ADS is a liiiiiitle lower than my hipfire. (all multipliers are default xFactor 0.020000 and MouseSensitivityMultiplierUnit 0.020000 P.S sorry i know my eng. isnt good but i think you understood what i meant. P.S.S. i have the premium,so all options can be used.
-
Hey guys! Today I bought Kovaak's aim trainer to practice for my games. I mainly play CSGO so i calculated from CSGO to Kovaak's. As I wanted to calculate my sensitivity I realized something was wrong when the calculator got a different result for a 360 turn (in CSGO) than reality. In reality a 360 turn takes 56 cm (22 inches), in theory it should be 14.43 inches. My settings: 0.7 sensitivity, 1620 CPI, 1000 polling rate, raw input on, no mouse acceleration, 1280x1024 stretched. Any help would be appreciated! Something interesting I noticed: with the same settings it takes 14.43 inches in Kovaak's to do a 360, just like in theory.
-
So i'm pretty clueless when it comes to DPI, i'm testing 3 of my mice, measuring my cm/360 in CS:GO (800, 1.2). I'm testing 3 mice each at the same dpi: Rival 300, G703 and EC2-B. I understand that different sensors may produce different results, however the only mouse in this case that is producing a different result is my Rival 300 (undershoots a little bit, whereas my other 2 mice do a perfect 360 on my mousepad width). I'm doing it by feel so it's probably a little innacurate, but I increased my rival's dpi by 50 and it seemed to give the same result as the other two. I've seen some places that the hero sensor has different calculations but mine seems pretty consistent with my EC2-B, my question is: Is this something that changes from sensor to sensor, or is it just steelseries that has different calculations and should i keep this in mind if i ever change my mouse again? I've changed mouse a few times but never really taken this into account, just picked the same dpi and gone with it, i've actually had trouble because i used the original rival on release and could never find a new mouse to fit me afterwards. Hope someone smarter than I can give me the answer!
-
Hello, I play on my 24" monitor. But I need to play on my 16" laptop for a couple of weeks. But I'm afraid that I'm going to mess up my muscle memory as screen size is not same. I don't seem to know how to convert my sens for the new screen size. Can anyone help converting my csgo sens, fov and settings for the laptop screen (or basically new monitor?) Main monitor- 24 inch, Csgo sens- 0.80 Dpi-1600 Csgo fov- 122 hfov, 91 vfov (sv_cheats enabled) (fov_cs_debug 107.07) Fov type- hdeg res Resolution- 1920×1080 Windows- 6/11 (both) Laptop screen- 16 inch Laptop resolution- 1366×768 (16:9) Much appreciated if anyone converts for me. New to the community
-
Hello! I've been playing modern warfare past two days since release and i switched over my sens. I noticed that you have ADS and scope sensitivity. At first i thought this was fine but then i noticed that the scope sensitivity also applies to 3.25% scopes such as the multiple zoomed red dot sights currently featured in the game. The scope sensitivity converts to (obviously) your sniper rifle scopes however this makes it so that if you ever play with any of the multiple 3.25% scopes, you will be inaccurate with them since the current calculator seems to scale for the sniper scopes only. Maybe an option should be added for the calculator so it will calculate especially for the 3.25% scopes since they're basically really good scopes to use. I may be mistaken with all this so I apologize in advance if you already had this covered in some way.
-
I tried using the calculator and input everything correctly and the only thing that worked was the hip fire and the other sensitivity didn’t give me a 1:1 sensitivity. Can anyone help me? -
Hello then here is before I play with this resolution: 1024x768 and I had 0.92 sensi for 3500 DPI. I took over CS:GO but I would like to play in 1920x1080, but the converter tells me that I must keep the same mouse sensitivity. But I feel so much like she's different. Did I do the conversion wrong? We agree I shouldn't have the same sensitivity on a different resolution. 1920x1080 24 inch. Thx for help -
Overwatch ADS Sensitivity to R6:S ADS Sensitivity?
IVAKirevam posted a topic in Technical Discussion
I want to have my sensitivities be fairly consistent over most of my games, but I have no idea how the ADS sensitivity conversion works. My ADS sens for R6 is 90 and I'd think I'd like to have my Widowmaker/Ana ADS sens be similiar to the ACOG and my Ashe sens (if it IS different from WM and Ana) be similiar to the 1x sights from R6. -
i cant get my cs settings to apex its too confusing please help csgo resolution settings - 4:3 1280x960 game sense - 2.09 400dpi apex legends resolution settings - 16:9 1920x1080 fov 110 please help transfer csgo to apex mouse sens and ads mouse sens thank you!!
-
Hi I'm an fps user with overwatch, apex legends, r6, pubg. I want to adjust the apex legens sensitivity to overwatch, r6, pubg But I'm trying to get all the same sensitivity, but it's not easy. I do not know how to set Conversion setup, fov type on the calculator. And when we do overwatch, we often do solder76, and when we adjust the sensitivity, we have to confuse whether we should do with hipfire or ads. The fov value is written like this apex legend fov: 104 r6 fov: 90 overwatch fov: 103 pubg fov: TPP (FPP: 103)
-
Hi ! I don't understand about viewspeed ect... Someone can help me about my settings from csgo to r6s please ? ---------------------------------------------------------------- Settings CSGO : 2.2 sens, 1024x768 Black Bars, m_rawinput 1, viewmodels : 68, 400 DPI, 24 inches Monitor size. ---------------------------------------------------------------- Settings for r6s : 1920x1080, 78 FOV, 400 DPI. Want this for my HIPFIRE and my Iron Sight please I'm premium but i don't really understand why viewspeed or others... ^^', please and thanks if someone help me !
