Jump to content

XDefiant


Recommended Posts

Posted

Something is up with 3x. It's incredibly high sensitivity compared to the red dot or holo. Wasn't like this in beta, so they may have adjusted it. Unfortunate considering if you run an SMG with a red dot one round and a 3x the next round you'll have to adjust sensitivity round to round.

  • Wizard
Posted
8 hours ago, Izzu said:

Something is up with 3x. It's incredibly high sensitivity compared to the red dot or holo. Wasn't like this in beta, so they may have adjusted it. Unfortunate considering if you run an SMG with a red dot one round and a 3x the next round you'll have to adjust sensitivity round to round.

The 3x and 4x was bugged in the last beta as they didn't zoom more than ironsight. but since they have disabled the practice zone I need to unlock some of the scopes so I've removed them from the calculator until I can get them analyzed.

7 hours ago, KugelmagnetEddie said:

Is Ironsight different then Red Dot? 

Calculator says no, but it feels so off. 

i wish shooter devs would just stop making these weird decisions :D

They should be the same as far as I can tell.

Posted (edited)

o ponto e o holo são horríveis neste jogo, estou tentando de todas as maneiras encontrar o ponto!


who can save us lol

Edited by gigo10
  • Wizard
Posted
On 5/23/2024 at 9:54 PM, Journalist said:

This game has additional zoom inside the scopes, so sensitivities should be smaller.

It is the inner FOV that is being used for what I have access to, others will be updated as I get them.

Posted
On 5/22/2024 at 1:27 AM, DPI Wizard said:

The 3x and 4x was bugged in the last beta as they didn't zoom more than ironsight. but since they have disabled the practice zone I need to unlock some of the scopes so I've removed them from the calculator until I can get them analyzed.

They should be the same as far as I can tell.

Practice zone is back up, FYI

Posted

8x is too fast

Mouse Sensitivity 14
Mouse ADS Sensitivity Multiplier (Low Zoom) 0.92x (ADS - Holo, Ironsight, Red Dot, Reflex) 
Mouse ADS Sensitivity Multiplier (Low Zoom) 0.40x (3x - Scope) 
Mouse ADS Sensitivity Multiplier (Low Zoom) 0.37x (4x - ACOG) 
Mouse ADS Sensitivity Multiplier (High Zoom) 0.43x (8x - CQBSS, Variable Zoom) 
Mouse ADS Sensitivity Multiplier (High Zoom) 0.35x (12x - Sniper) 

360° Distance: 45.6111 centimeters
Max discrepancy: -0.99% (-3.2635 centimeters)
Pixel ratio: 0.3388 pixels/count
Config FOV: Field of View 118
Actual VFOV: 86.22283 degrees
Actual HFOV: 118 degrees
ADS Field of View: Consistent

 

Posted
On 5/26/2024 at 10:07 PM, DPI Wizard said:

8X is based on the beta as I haven't unlocked it yet. If it's significantly changed it will be wrong, so I'll remove it until I get it unlocked.

I hope you find some time to grind, I really would like the 8X to be added xD

Posted
12 hours ago, DPI Wizard said:

All scopes are added and verified now.

You grinded out all the scopes already? I only have a few subscriptions I'm willing to pay for and this site will forever be one of them!

Posted

Since we're able to use the .cfg to get exact ADS values for low zoom and high zoom, would it not work correctly if we did the same thing for hip sensitivity? Or does the game just completely not register decimal values at all whatsoever?

  • Wizard
Posted
Just now, khu said:

Since we're able to use the .cfg to get exact ADS values for low zoom and high zoom, would it not work correctly if we did the same thing for hip sensitivity? Or does the game just completely not register decimal values at all whatsoever?

No, it only accepts whole numbers for the hipfire unfortunately. Adding any decimal will make it reset to 30 😕

Posted
12 minutes ago, DPI Wizard said:

No, it only accepts whole numbers for the hipfire unfortunately. Adding any decimal will make it reset to 30 😕

... sigh ... well I guess it's good the Viper V3 Pro allows to change DPI in increments of "1" since the advanced mode tells you the closest DPI needed to match the cm/360 ... it's just a bummer that something that's available for PC doesn't even have that. Always thought things like that was standard 😶‍🌫️

  • Wizard
Posted
2 minutes ago, bread94 said:

image.png.8bb46066b928e64db168a427d6e1ae1d.pngummm... the calculator is kinda broken atm. that ads is usually about 28cm

Did you mean to enter 3 as Mouse Sensitivity? 3 is very low, and the calculation is correct based on this.

Also, nothing has changed with this calculation for over two months.

  • 2 months later...
Posted

A new patch is releasing tomorrow, one of the notes is "Reduced aiming sensitivity while aiming with a scope to compensate for the field-of-view change." It'd be great if you could scope out the changes once the patch goes live! 😀

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...