CM360 distance - seems more than the stated amount

[Karigmar]

Hey there, first post here, I've lurked for quite a while. I was just noticing that my CM360 states 14.4318 yet when I do a 360 ingame (on both eternal, overwatch) it takes the full length of my mat (I've got it rotated due to space constraints) the mat in question is 90x50CM, so I'm a bit curious - does anyone have any information regarding the stated CM360 and why it varies so highly?

For those curious:

Sensitivity 1:

Sensitivity 6

360° Distance:

14.4318 centimeters

Pixel ratio:

0.6927 pixels/count

Config FOV:

Field of View 103

Actual VFOV:

56.63052 degrees

Actual HFOV:

103 degrees
 

 

[DPI Wizard]

47 minutes ago, Karigmar said:

Hey there, first post here, I've lurked for quite a while. I was just noticing that my CM360 states 14.4318 yet when I do a 360 ingame (on both eternal, overwatch) it takes the full length of my mat (I've got it rotated due to space constraints) the mat in question is 90x50CM, so I'm a bit curious - does anyone have any information regarding the stated CM360 and why it varies so highly?

With this huge difference it sounds like you are using the wrong DPI. Do you have a mouse driver that might switch DPI profiles automatically when starting games?

[Karigmar]

I've got Logitech HUB but the DPI's are set the same for the different profiles, I will have a look to make sure though. The weird thing is R6S is actually 14CM 360 but halving it essentially uses the entire mousemat to 360. Eternal and Overwatch both require the entire pad and are certainly not 14CM 360.

Appreciate the reply too, thanks for dropping in - I'll update if I find anything

[Karigmar]

As an update it appears that It's created profiles for the games without notifying me. So my usual is 1600 but the other HUB created profiles are 800 it seems which is half the DPI. This is actually really really annoying as I did not specify for it to do this and has definitely set me back. Thanks for notifying though, I did look at the different default profiles but not application based ones.
 

Guess I'll have to readjust again

Cheers