Selaco

[DPI Wizard]

The sensitivity slider is not accurate, use the config file for best accuracy.

View full update

[Audile]

hey @DPI Wizard,

Not sure if this is my imagination, but it feels like FOV changes slightly when "Chromatic Aberration" is disabled. Could you please confirm?

Thanks

[DPI Wizard]

Just now, Audile said:

Not sure if this is my imagination, but it feels like FOV changes slightly when "Chromatic Aberration" is disabled. Could you please confirm?

This is pretty much always the case with chromatic aberration, as it narrows the FOV a tiny bit to add the edge effect. It's usually an insignificant amount though.

[Audile]

On 6/16/2024 at 8:39 PM, DPI Wizard said:

This is pretty much always the case with chromatic aberration, as it narrows the FOV a tiny bit to add the edge effect. It's usually an insignificant amount though.

I had no idea, thanks for the info. Safe to say that turning it off or on shouldn't affect the sensitivity enough then, cheers!

[Bainelf]

Path moved to C:\Users\[USERNAME]\AppData\Roaming\Selaco-EA

[DPI Wizard]

4 hours ago, Bainelf said:

Path moved to C:\Users\[USERNAME]\AppData\Roaming\Selaco-EA

Thanks, updated the path now.

[orangekiwii]

The vertical sensitivity isn't accurate for me. Needs to be unlinked and then set 1:1 in-game or to half sensitivity in the config file.

 

Additionally, there is some disgusting polling rate issues with this game. It doesn't feel like mouse acceleration but it drops any low-speed movements when above 500 hz and probably even at 500hz as my mouse cannot poll lower. It makes the sensitivity feel extremely off at 2khz (typical use) even though I think its calculated correctly and feels 95% accurate at 500hz.

[DPI Wizard]

11 hours ago, orangekiwii said:

The vertical sensitivity isn't accurate for me. Needs to be unlinked and then set 1:1 in-game or to half sensitivity in the config file.

I've updated the vertical now. It's not exactly half, but close.

As for the polling rate issues, I can't see any issues here up to 1000 Hz, but this might be affected by hardware or drivers etc.