Call of Duty Modern Warfare (2019)/Warzone - Legacy to Relative ADS Conversion

[Seloc]

Hi All - Just curious if anyone could advise how to find the conversion between my ADS behavior from legacy to relative in COD MW (2019/Warzone). 

My current sensitivity is:

Mouse Sensitivity: 4

ADS Mouse Sensitivity: Legacy

ADS Sens Multiplier (Low Zoom): 0.55

ADS Sens Multiplier (High Zoom): 0.55

I'd like to know what my ADS Sens Multipliers for low zoom and high zoom should be if I switch to Relative at 1.33 MDC.

Thanks!

 

[DPI Wizard]

What's your FOV?

[fortunate reee]

1 minute ago, Seloc said:

Hi All - Just curious if anyone could advise how to find the conversion between my ADS behavior from legacy to relative in COD MW (2019/Warzone). 

My current sensitivity is:

Mouse Sensitivity: 4

ADS Mouse Sensitivity: Legacy

ADS Sens Multiplier (Low Zoom): 0.55

ADS Sens Multiplier (High Zoom): 0.55

I'd like to know what my ADS Sens Multipliers for low zoom and high zoom should be if I switch to Relative at 1.33 MDC.

Thanks!

 

its generally advisable to set ads multipliers to 1.0 and then use either 1.333 or 0.000 multiplier depending on your preference 

 

(if i am not incorrect ) legacy should in theory be similar to 0,0000 1.0 multiplier with ads affected 

[DPI Wizard]

2 minutes ago, fortunate reee said:

(if i am not incorrect ) legacy should in theory be similar to 0,0000 1.0 multiplier with ads affected 

Legacy is locked to a base FOV og 65 Hdeg 4:3 though, so it's only possible to match two aims (one low and one high) if you change to relative.

So unless the FOV is actually 80.691 (which equals 65 Hdeg 4:3) it won't be the same with 0 coefficient.

[Seloc]

FOV = 115

[DPI Wizard]

4 minutes ago, Seloc said:

FOV = 115

Ok, then this would be the approach, as mentioned you can only match one low and one high when you switch from Legacy to Relative:

https://www.mouse-sensitivity.com/?share=dac65f53f3ca48e2aa86dbfc4ebcf573