howtobuildpls Posted July 28, 2018 Posted July 28, 2018 3 minutes ago, DPI Wizard said: You used to be able to turn it on and off in the config file, but they made it permanently off a while ago. In my config it says bDisableMouseAccelaration=false, does this matter or? If they changed it should it automatically be set to "true" or does it just ignore it?
Wizard DPI Wizard Posted July 28, 2018 Author Wizard Posted July 28, 2018 1 minute ago, howtobuildpls said: In my config it says bDisableMouseAccelaration=false, does this matter or? If they changed it should it automatically be set to "true" or does it just ignore it? It just ignores it now. howtobuildpls 1
bebeto Posted July 28, 2018 Posted July 28, 2018 34 minutes ago, DPI Wizard said: No, no acceleration at all. Save the World has had issues with high report rates being experienced as negative acceleration (packet loss), put this was fixed last time I checked. When you have time could you check again STW at 1000hz because even today, i have retried doing fast swipe vs very slow. Fast movement, crosshair always end ups shorter of where it should be. It will also help me determine if it's on my side or not.
Watchdog Posted July 28, 2018 Posted July 28, 2018 Any different now after the update? It feels weird and when you "ads" the character blocks half the screen.
NoahSlayer Posted August 1, 2018 Posted August 1, 2018 There was post on reddit explaining stretched res on Fortnite. So If I want to go from 1920×1080 to 1600×1080 stretched, should I increase my vertical sens to keep the view distance sens same?
StoCS Posted August 11, 2018 Posted August 11, 2018 guys how do i get my fortnite sensitivity to aimhero should i put it to 360 degree or what?
StoCS Posted August 11, 2018 Posted August 11, 2018 Can you jest tell me the full settings i need to put in?
devilish Posted August 14, 2018 Posted August 14, 2018 playing 1440x1080 streched am i doing this right?
Wizard DPI Wizard Posted August 14, 2018 Author Wizard Posted August 14, 2018 9 hours ago, devilish said: playing 1440x1080 streched am i doing this right? Correct if you prefer Viewspeed 2. 360 distance (which will result in the same sensitivity as the input) might be more natural though since the horizontal FOV is the same and the image is stretched.
Wizard DPI Wizard Posted August 14, 2018 Author Wizard Posted August 14, 2018 FOV calculations for Fortnite are now updated to correctly account for FOV's wider than 16:9.
devilish Posted August 14, 2018 Posted August 14, 2018 45 minutes ago, DPI Wizard said: Correct if you prefer Viewspeed 2. 360 distance (which will result in the same sensitivity as the input) might be more natural though since the horizontal FOV is the same and the image is stretched. Oh ok thanks what about targeting and scope sniper?
Wizard DPI Wizard Posted August 14, 2018 Author Wizard Posted August 14, 2018 On 8/11/2018 at 8:59 AM, StoCS said: guys how do i get my fortnite sensitivity to aimhero should i put it to 360 degree or what? Use 360 distance and match the FOV's so the sensitivity and FOV will be the same.
Mundy Posted August 18, 2018 Posted August 18, 2018 Wait the fov is the same when ads'd? I always assumed it felt off because I was using 1 ads sensitivity and it was reducing the fov making it feel fast.
Wizard DPI Wizard Posted August 18, 2018 Author Wizard Posted August 18, 2018 4 minutes ago, Mundy said: Wait the fov is the same when ads'd? I always assumed it felt off because I was using 1 ads sensitivity and it was reducing the fov making it feel fast. The ADS is the same when targeting with most weapons, but if you have something like a hunting rifle with no scope, targeting is actually the same as rifle scope.
Mundy Posted August 18, 2018 Posted August 18, 2018 3 minutes ago, DPI Wizard said: The ADS is the same when targeting with most weapons, but if you have something like a hunting rifle with no scope, targeting is actually the same as rifle scope. Thanks for the really quick reply. That suprises me, I was sure even AR's had a lower fov when targeting. Thanks for the info though.
StoCS Posted August 20, 2018 Posted August 20, 2018 (edited) Can anyone explain to me what the different FOV TYPES and the different type of conversions are used for Edited August 20, 2018 by StoCS
Drimzi Posted August 21, 2018 Posted August 21, 2018 7 hours ago, StoCS said: Can anyone explain to me what the different FOV TYPES and the different type of conversions are used for The fov types are just different measurements commonly used by games. The measurement refers to where the engine internally measures the angle, which could be vertically, horizontally, or some hardcoded aspect ratio. It could be in degrees or radians.
StoCS Posted August 21, 2018 Posted August 21, 2018 Ok i need some more help. Im playing fortnite in 2560x1080 now but before i was playing with 1920x1080. I used a Savefile sens of 0.0113 in 1920x1080 how do i get the same sens back on this different resolution wich is 2560x1080. wich setting and stuff do i use
Drimzi Posted August 21, 2018 Posted August 21, 2018 12 minutes ago, StoCS said: Ok i need some more help. Im playing fortnite in 2560x1080 now but before i was playing with 1920x1080. I used a Savefile sens of 0.0113 in 1920x1080 how do i get the same sens back on this different resolution wich is 2560x1080. wich setting and stuff do i use Try 0.015067 sensitivity, and then convert your mouse CPI to the new screen using http://www.admiralbumblebee.com/general/2017/12/08/Transfer-mouse-CPI-settings-to-a-different-resolution-device.html MuntyYy 1
StoCS Posted August 21, 2018 Posted August 21, 2018 (edited) im not playing on a different monitor. it is the same monitor but before i steched the res to 1920x1080 Edited August 21, 2018 by StoCS
StoCS Posted August 21, 2018 Posted August 21, 2018 thats what i got so does that mean i use the sens u gave me and a dpi of 500?
Drimzi Posted August 21, 2018 Posted August 21, 2018 Never mind the above then, as your comparing distorted and non distorted sensitivity.
MoonGazing Posted August 21, 2018 Posted August 21, 2018 i keep getting Calculated sensitivity too high Increase either sensitivity 1 or new DPI ami doing something wrong? Im just trying to find the targeting
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now