enfyyy Posted February 5, 2021 Posted February 5, 2021 Hey, i want to find out about my apex legends sens. The Halo 4 regular sens should be the same as the 1x scope sens in apex. Without changing anything about the ADS sens, what is the overall apex sens and how can i calculate this. My fovscale in apex is 1.5. In Halo 4 i use the max fov 120 while using a sens of 1.2 ingame. I play on 800 dpi.
Wizard DPI Wizard Posted February 5, 2021 Wizard Posted February 5, 2021 8 minutes ago, enfyyy said: Hey, i want to find out about my apex legends sens. The Halo 4 regular sens should be the same as the 1x scope sens in apex. Without changing anything about the ADS sens, what is the overall apex sens and how can i calculate this. My fovscale in apex is 1.5. In Halo 4 i use the max fov 120 while using a sens of 1.2 ingame. I play on 800 dpi. If by same you mean the same 360 distance, this would be the best approach: https://www.mouse-sensitivity.com/?share=7eac93928fa1ddf087d5d488ed329436 This is matching hipfire and ADS to the 360 distance of Halo, but the scopes are using the default conversion of MDV 0% as I haven't changed that no knowing your preference. But for hipfire and ADS this should work.
enfyyy Posted February 5, 2021 Author Posted February 5, 2021 What i wanted to say is how to find out my normal apex sens when my 1x sens is matching my halo sens. For example 1.5 in apex legends is 1.150990482 in 1x scope sens (my fovscale etc.). Which sens do i need to use ingame (1.5 in the example) to make sure 1x is the same as my halo sens. I appreciate ur support. It isnt the best explanation i guess. Do u mean the default conversion of apex? It should stay default. Using 1920x1080 res on 24,5 inch asus xg258
Wizard DPI Wizard Posted February 5, 2021 Wizard Posted February 5, 2021 1 minute ago, enfyyy said: What i wanted to say is how to find out my normal apex sens when my 1x sens is matching my halo sens. For example 1.5 in apex legends is 1.150990482 in 1x scope sens (my fovscale etc.). Which sens do i need to use ingame (1.5 in the example) to make sure 1x is the same as my halo sens. I appreciate ur support. It isnt the best explanation i guess. If you want to convert from Halo hipfire to Apex 1X, then the Apex hipfire from there you need to establish some grounds for conversion. The default of the calculator for any aim is MDV 0%, which is in fact the same as Apex uses as value 1 if your hipfire FOV is the same between the games. So to break it down, you first do Halo hipfire -> Apex 1X - These will in your case not be the same FOV, so you need to do some kind of conversion. Do you keep the same 360 distance? The same tracking speed (MDV 0%), the same flick speed to the end of the screen (MDH 100%)? Then when converting from Apex 1X to Apex hipfire you have the same issue, how do you convert it? What is your preference? The calculator is by default set up to match hipfire sensitivity using 360 distance, because in most games you use hipfire to navigate and not aim (there are exceptions!). While ADS and scope are set to MDV 0%, which is the default for games like Apex and CoD where the tracking speed of the crosshair remains the same. The important part is that unless the FOV is identical, none of these are the same. You need to settle on one method to use that suits you. There is no best method as everyone is different, but MDV 0% is usually the most preferred method for aims.
enfyyy Posted February 5, 2021 Author Posted February 5, 2021 vor 26 Minuten schrieb DPI Wizard: If you want to convert from Halo hipfire to Apex 1X, then the Apex hipfire from there you need to establish some grounds for conversion. The default of the calculator for any aim is MDV 0%, which is in fact the same as Apex uses as value 1 if your hipfire FOV is the same between the games. So to break it down, you first do Halo hipfire -> Apex 1X - These will in your case not be the same FOV, so you need to do some kind of conversion. Do you keep the same 360 distance? The same tracking speed (MDV 0%), the same flick speed to the end of the screen (MDH 100%)? Then when converting from Apex 1X to Apex hipfire you have the same issue, how do you convert it? What is your preference? The calculator is by default set up to match hipfire sensitivity using 360 distance, because in most games you use hipfire to navigate and not aim (there are exceptions!). While ADS and scope are set to MDV 0%, which is the default for games like Apex and CoD where the tracking speed of the crosshair remains the same. The important part is that unless the FOV is identical, none of these are the same. You need to settle on one method to use that suits you. There is no best method as everyone is different, but MDV 0% is usually the most preferred method for aims. Is it better to change my halo fov to 106.3 hfov then? Which means 110.048774 ingame fov (but i guess this value for the ingame fov wont work). Overall i would go for the Halo hipfire matching my apex 1x in tracking speed (MDV 0%) which makes the most sense i guess. <--- this is the important value. From there i just need to find the ingame sens in apex legends which by default has the 1x sens i found (important value) or am i wrong? So sorry for this mess.
enfyyy Posted February 5, 2021 Author Posted February 5, 2021 If i go for a fov of 110 in Halo, how can i find out which apex fovscale matches the hfov of 110 Halo at the 1x. I need to adjust the halo sens afterwards for sure.
Wizard DPI Wizard Posted February 6, 2021 Wizard Posted February 6, 2021 22 hours ago, enfyyy said: If i go for a fov of 110 in Halo, how can i find out which apex fovscale matches the hfov of 110 Halo at the 1x. I need to adjust the halo sens afterwards for sure. See the Actual HFOV in the output for Halo, then select Hdeg Res as FOV Type for Apex and enter this number. The output for Apex will show you the Config FOV to get this exact FOV: https://www.mouse-sensitivity.com/?share=2d92e0f59af45d6e68d3636cc1ea843a
enfyyy Posted February 6, 2021 Author Posted February 6, 2021 see this is not the answer i was looking for. But im fine i guess.
Wizard DPI Wizard Posted February 7, 2021 Wizard Posted February 7, 2021 15 hours ago, enfyyy said: see this is not the answer i was looking for. But im fine i guess. It's the same concept for 1X, but 1X isn't in the calculator. What weapon are you using with 1X?
enfyyy Posted February 11, 2021 Author Posted February 11, 2021 Am 7.2.2021 um 15:49 schrieb DPI Wizard: It's the same concept for 1X, but 1X isn't in the calculator. What weapon are you using with 1X? I use r301 or r99/wingman/mastiff. I guess even with the 1x it isnt the same fov but i would go for smgs/pistols.
Wizard Solution DPI Wizard Posted February 11, 2021 Wizard Solution Posted February 11, 2021 3 minutes ago, enfyyy said: I use r301 or r99/wingman/mastiff. I guess even with the 1x it isnt the same fov but i would go for smgs/pistols. Ok, I understand now. Do like this then: https://www.mouse-sensitivity.com/?share=254452441a00d8ede8e38399bf85d4a4 This will match the 1X Scope in Apex to Halo hipfire. Hipfire in Apex will be calculated based on the Hipfire / Look setup, set to MDV 0% in this example.
shaeofwar Posted February 12, 2021 Posted February 12, 2021 (edited) If you set your halo fov to 110 and Apex fov to 1.5. You can match your halo hipfire sens to match apex 1x perfectly. As in they will have same fov and 360 distance. Like this. https://www.mouse-sensitivity.com/?share=b28e63ebafe242679acacacefd79de6a Also every zoom level will be consistent to 0% mm Edited February 12, 2021 by shaeofwar Clarifying
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now