Feeling weird about r6s and hyper scape

[Hottososu]

I was like getting sensitivity with the calculator,and it just feels really weird.

When I use the number i got,its like way slow,and it even feels different in r6s and hyper scape?

How can that be?

I was end up using multiplier 0.0025 with r6s , I was like ok it just works i guess?

Then when I getting sensitivity with hyper scape , its neither 5.796 nor 6.25,but 6?

Would really appreciate it if u guys can look into it.

 

Edited August 12, 2020 by Hottososu

[Hottososu]

And I do check with the dpi analyzer,its like 800 of 800 with no problem

[DPI Wizard]

Can you link your conversion? Use the purple share button.

[Hottososu]

https://www.mouse-sensitivity.com/?share=daeb8c98d8b5eaa52e957221443fe98d

[Hottososu]

And this is the hyper scape one

https://www.mouse-sensitivity.com/?share=8ea95b63876207ec8c8b30e8479dc437

[Hottososu]

And this is the hyper scape one

https://www.mouse-sensitivity.com/?share=8ea95b63876207ec8c8b30e8479dc437

[DPI Wizard]

1 hour ago, Hottososu said:

Then when I getting sensitivity with hyper scape , its neither 5.796 nor 6.25,but 6?

This is because the game doesn't support 5.796 or 6.25 etc, it only supports whole numbers. So the calculator rounds to the closest match possible.

 

[Hottososu]

Just now, DPI Wizard said:

This is because the game doesn't support 5.796 or 6.25 etc, it only supports whole numbers. So the calculator rounds to the closest match possible.

 

It did support that after official launched,that can be adjust in config file and would stay I guess

[fortunate reee]

1 hour ago, Hottososu said:

I was like getting sensitivity with the calculator,and it just feels really weird.

When I use the number i got,its like way slow,and it even feels different in r6s and hyper scape?

How can that be?

I was end up using multiplier 0.0025 with r6s , I was like ok it just works i guess?

Then when I getting sensitivity with hyper scape , its neither 5.796 nor 6.25,but 6?

Would really appreciate it if u guys can look into it.

r6 should work perfectly fine i played a couple of rounds yesterday

make sure you set your fov in the config file

[Hottososu]

3 minutes ago, fortunate reee said:

r6 should work perfectly fine i played a couple of rounds yesterday

make sure you set your fov in the config file

I did set that correctly tho... Things getting weirder huh

[fortunate reee]

Just now, Hottososu said:

I did set that correctly tho... Things getting weirder huh

just making sure , have seen enough csgo players use 90 ingame fov in siege (slight ptsd)

 

is it ads of hipfire that feel slower ?

[DPI Wizard]

6 minutes ago, Hottososu said:

It did support that after official launched,that can be adjust in config file and would stay I guess

Holy hell, Ubisoft actually fixed it! Great news, adding config file sensitivity now, should be up in 5-10 minutes!

[Hottososu]

Just now, fortunate reee said:

just making sure , have seen enough csgo players use 90 ingame fov in siege (slight ptsd)

 

is it ads of hipfire that feel slower ?

hipfire I guess,its like noticeable slow

[DPI Wizard]

Updated it now so it's accurate to 6 decimals for the config file calcualtion.

[Hottososu]

2 minutes ago, DPI Wizard said:

Updated it now so it's accurate to 6 decimals for the config file calcualtion.

Seems it still getting the same result tho, I was doing it like try these numbers until it gets 1.5 in csgo

[fortunate reee]

21 minutes ago, DPI Wizard said:

Holy hell, Ubisoft actually fixed it! Great news, adding config file sensitivity now, should be up in 5-10 minutes!

that almost  makes the game playable nice

 

20 minutes ago, Hottososu said:

hipfire I guess,its like noticeable slow

could try to set the calculator to config config

then use the multipliers

 

its should work as intended

<--this is what i use atm and it works well

i swap between apex warzone destiny etc on the daily

Edited August 12, 2020 by fortunate reee

[DPI Wizard]

Just now, Hottososu said:

Seems it still getting the same result tho, I was doing it like try these numbers until it gets 1.5 in csgo

The calculations are spot on at least, it's exactly the same as R6 with the config file sensitivity MouseSensitivityMultiplierUnit set to 0.02. Have you turned on raw input? How far off is it?

[Hottososu]

1 minute ago, DPI Wizard said:

The calculations are spot on at least, it's exactly the same as R6 with the config file sensitivity MouseSensitivityMultiplierUnit set to 0.02. Have you turned on raw input? How far off is it?

I did turn it on.

I would say its not too much,but its somewhere about 30 degrees when doing 180  I assume?

[Hottososu]

15 minutes ago, fortunate reee said:

that almost  makes the game playable nice

 

could try to set the calculator to config config

then use the multipliers

 

its should work as intended

That was a nightmare lol

Doing 180 turns out doing 270,appreciate it tho

[fortunate reee]

14 minutes ago, Hottososu said:

That was a nightmare lol

Doing 180 turns out doing 270,appreciate it tho

those 3 need to have the same number as 

 

self explanatory

 

if you got all that set up correctly

the only thing that can impact perceived speed /distance would be stretched res and all that stuff

 

*values are just examples

Edited August 12, 2020 by fortunate reee

[DPI Wizard]

21 minutes ago, Hottososu said:

I did turn it on.

I would say its not too much,but its somewhere about 30 degrees when doing 180  I assume?

Can you attach your config files from both R6 and Hyper Scape?

[Hottososu]

10 minutes ago, DPI Wizard said:

Can you attach your config files from both R6 and Hyper Scape?

Sure

GameSettings.ini GameSettings.ini

[Hottososu]

17 minutes ago, fortunate reee said:

those 3 need to have the same number as 

 

self explanatory

 

if you got all that set up correctly

the only thing that can impact perceived speed /distance would be stretched res and all that stuff

 

*values are just examples

I did give it a shot,and its like slightly better but losing some flexibility I guess

[DPI Wizard]

9 minutes ago, Hottososu said:

Sure

GameSettings.ini 3.97 kB · 1 download GameSettings.ini 3.82 kB · 1 download

To perfectly match these you should set the sensitivity in Hyper Scale to 6.25, did you try this?

What you also can try is this tool. Download and run it, then only change the CPI to your DPI and enter the distance as calculated in the calculator. It's important that you use the numbers you actually have in the game, so your R6 file would look like this:

https://www.mouse-sensitivity.com/?share=4770368b68f37d3cb754c512fd22efa7

Executing this program with the settings in the link when in the games should turn you exactly 360 degrees.

 

[Hottososu]

2 minutes ago, DPI Wizard said:

To perfectly match these you should set the sensitivity in Hyper Scale to 6.25, did you try this?

What you also can try is this tool. Download and run it, then only change the CPI to your DPI and enter the distance as calculated in the calculator. It's important that you use the numbers you actually have in the game, so your R6 file would look like this:

https://www.mouse-sensitivity.com/?share=4770368b68f37d3cb754c512fd22efa7

Executing this program with the settings in the link when in the games should turn you exactly 360 degrees.

 

Well,6.25 is the right number tho,since I got 5.96 with calculator,

But I would try it out with hyper scape and see what it turns out to be.