Rogue Company

[DPI Wizard]

Rogue Company is finally added!

[Electroz]

i want to have the same sens on rogue company as on fortnite hipfire 5%  ads 100% 100%

[DPI Wizard]

12 minutes ago, Electroz said:

i want to have the same sens on rogue company as on fortnite hipfire 5%  ads 100% 100%

https://www.mouse-sensitivity.com/?share=83bc9e17995b6c9714e180b7642d1fce

For Targeting in Rogue just set it to 100 since the calculated sensitivity is slightly higher.

[kotaim]

 

Am 21.8.2020 um 21:51 schrieb DPI Wizard:

https://www.mouse-sensitivity.com/?share=83bc9e17995b6c9714e180b7642d1fce

For Targeting in Rogue just set it to 100 since the calculated sensitivity is slightly higher.

I think the calculation of the first zoom sens is bugged. It almost always displays that my sens is too high and that sens number goes up the higher my target DPI is. Pretty sure it should go down like the other numbers. Even if I set my target DPI to 3200 (from 800 in my source game settings) it says the calculated sens is too high.

[DPI Wizard]

11 hours ago, kotaim said:

I think the calculation of the first zoom sens is bugged. It almost always displays that my sens is too high and that sens number goes up the higher my target DPI is. Pretty sure it should go down like the other numbers. Even if I set my target DPI to 3200 (from 800 in my source game settings) it says the calculated sens is too high.

It's not bugged, it's the game that lacks the range to match your preference. At 100 (which is max) it's already really slow compared to hipfire.

[kotaim]

Am 21.9.2020 um 15:01 schrieb DPI Wizard:

It's not bugged, it's the game that lacks the range to match your preference. At 100 (which is max) it's already really slow compared to hipfire.

But shouldn't the number still go down when I increase the DPI? See what happends when I go from 800 DPI to 5000 DPI:

 

 

I don't think the sens slider can possibly be slow enough to not work with 5000 DPI

[DPI Wizard]

11 minutes ago, kotaim said:

But shouldn't the number still go down when I increase the DPI? See what happends when I go from 800 DPI to 5000 DPI:

I don't think the sens slider can possibly be slow enough to not work with 5000 DPI

Yes, but since you are converting using "All" the main adjustment is done in the "Look Sensitivity" value which goes from 2.1 to 0.2. The targeting sensitivity is a multiplier to the look sensitivity, so it's still unable to adjust it to your preference. If you instead keep 2.1 and set the DPI to 5000 it would work:

https://www.mouse-sensitivity.com/?share=fcf773a6154e9ce47dca3b53377f18c8

But this obviously makes the look sensitivity wrong so you need to have a DPI switch when targeting for this to work properly.

[kotaim]

vor 5 Stunden schrieb DPI Wizard:

Yes, but since you are converting using "All" the main adjustment is done in the "Look Sensitivity" value which goes from 2.1 to 0.2. The targeting sensitivity is a multiplier to the look sensitivity, so it's still unable to adjust it to your preference. If you instead keep 2.1 and set the DPI to 5000 it would work:

https://www.mouse-sensitivity.com/?share=fcf773a6154e9ce47dca3b53377f18c8

But this obviously makes the look sensitivity wrong so you need to have a DPI switch when targeting for this to work properly.

Oh I see thanks.

[Burner]

Is there a way to get a more exact value from the calculator? The config file seems to be at %localappdata%\RogueCompany\Saved\Config\WindowsNoEditor\Input.ini. I don't know if it will take a more accurate number tho.

[DPI Wizard]

9 minutes ago, Burner said:

Is there a way to get a more exact value from the calculator? The config file seems to be at %localappdata%\RogueCompany\Saved\Config\WindowsNoEditor\Input.ini. I don't know if it will take a more accurate number tho.

It unfortunately does not accept more than one decimal. The actually applied sensitivity from the file is the "SavedSettingsConfig=" in the bottom, and it ignores any decimals beyond the first.

[Jimmie Awesome]

Hello. Could you update the converter settings for this game? The game has already been updated several times (it even broke the sens settings), and I have a feeling that the sens suggested by the converter does not suit me. Thank you!

[DPI Wizard]

9 hours ago, JimmieAwesome said:

Hello. Could you update the converter settings for this game? The game has already been updated several times (it even broke the sens settings), and I have a feeling that the sens suggested by the converter does not suit me. Thank you!

Can you share a specific conversion not working correctly?

[Jimmie Awesome]

Not sure how to best describe it... Sensitivity just doesn't fit. I cannot say for sure whether it is faster or slower.

[Jimmie Awesome]

I mean Targeting.

[DPI Wizard]

4 hours ago, JimmieAwesome said:

Not sure how to best describe it... Sensitivity just doesn't fit. I cannot say for sure whether it is faster or slower.

Try again now, targeting and scope needed an update indeed.

[Jimmie Awesome]

Worked, thanks!

[Jimmie Awesome]

Hello again.

A long time ago I noticed that whatever setting I put in the gyro section, it changes its behavior, but does not turn off completely. Is there any way to adjust the gyro on the PC so that it does not interfere with shooting? If it is possible, I would like to disable it completely.

One more thing... I do not know whether it is connected with the gyroscope or just a bug that the developers did not care about, but the sensitivity of ADS and optics are tied to each other. Is there any way to get rid of this relationship, or at least compensate for it?

Explanation of the problem: I play at 400 dpi, 3.8 sens, 77 ads and 48 optics. But I can not hit with optics if I do not set 79 ads, and it worsens my Aim. Also, I can't shoot normally with ads if I don't put 47 on the scope.

You can easily verify their relationship if you just change the neighboring sensitivity value.

For example, if you have 2.8sens/800dpi and 76 ADS, but you don't use sniper rifles. You left the stock value of 40 on the sniper and are hitting just fine with ads? Now for the trick! Change 40 to 41, 39, etc. In a normal game only the sensitivity of the optics will change. And here you will immediately stop hitting the target in ADS mode. Try it.

Edited August 1, 2022 by JimmieAwesome

[DPI Wizard]

17 hours ago, JimmieAwesome said:

A long time ago I noticed that whatever setting I put in the gyro section, it changes its behavior, but does not turn off completely. Is there any way to adjust the gyro on the PC so that it does not interfere with shooting? If it is possible, I would like to disable it completely.

This is purely a controller settings, maybe if you have a controller plugged in it interferes, I don't know. If you do, just unplug it.

17 hours ago, JimmieAwesome said:

One more thing... I do not know whether it is connected with the gyroscope or just a bug that the developers did not care about, but the sensitivity of ADS and optics are tied to each other. Is there any way to get rid of this relationship, or at least compensate for it?

Targeting and scope are completely independent of each other, as mentioned if you have a controller plugged in it might interfere.

[Jimmie Awesome]

25 минут назад, DPI Wizard сказал:

Targeting and scope are completely independent of each other, as mentioned if you have a controller plugged in it might interfere.

Much to my regret, I do not have a controller connected to my computer. If you don't mind (and provided you feel this kind of sensitivity change), could you check it yourself? Perhaps then you could find a solution to this problem?

[DPI Wizard]

Just now, JimmieAwesome said:

Much to my regret, I do not have a controller connected to my computer. If you don't mind (and provided you feel this kind of sensitivity change), could you check it yourself? Perhaps then you could find a solution to this problem?

I just did, changing scope sensitivity does not affect targeting at all (and vice-versa).

[Jimmie Awesome]

To be honest, I don't understand anything in this case anymore... This is already happening on my second computer. The first one i had i7 9700K and radeon 7870, and the current one i have r9 5900x and 1080ti. I have one guess, but I don't have any friends who play this game, so it's hard for me to verify it... I have fps cap disabled in my config. You can also disable it to check, but if that's not the case, I don't know what it could be related to.

Please do not consider it an advertisement, but this site has instructions on how to disable fps cap. I should add that "0" does not turn it off, but works like the standard "150". My current setting is "9999".

https://gameplay.tips/guides/11808-rogue-company.html

 

P.S.: could it be related to my mouse and high hertz? Viper 8 kHz, 400dpi/8000hz.

[DPI Wizard]

3 minutes ago, JimmieAwesome said:

P.S.: could it be related to my mouse and high hertz? Viper 8 kHz, 400dpi/8000hz.

Definitely, a lot of games have issues with 8 kHz polling rates. Try 1000 Hz or even 500 Hz and see if that helps.

[Jimmie Awesome]

2 часа назад, DPI Wizard сказал:

Definitely, a lot of games have issues with 8 kHz polling rates. Try 1000 Hz or even 500 Hz and see if that helps.

I'll give it a try, thanks for the advice.

 

P.S.: Given the peculiarities of the game, you need to restart the game after each change of the sensitivity setting. It is necessary for the sensitivity setting to take an integer value. Since there is no exact sensitivity setting, when you change it, for example, from 40 to 39, there probably put something like 39.6 and not 39. To make it just 39 you have to restart the game. I have no way to accurately check this, so this is just my guess, but every time I change the sensitivity from top to bottom it is different from the sensitivity I put from bottom to top. I have seen this happen in at least 2 games.

Edited August 2, 2022 by JimmieAwesome
Corrected a translation error. Again.

[Jimmie Awesome]

02.08.2022 в 17:22, DPI Wizard сказал:

Definitely, a lot of games have issues with 8 kHz polling rates. Try 1000 Hz or even 500 Hz and see if that helps.

Thank you for the advice, but alas, it did not help much. As you recommended, I lowered the hertz and tested at 1000 and 500 Hz, it got only slightly better in terms of "interconnectivity", but my accuracy dropped so much that I stopped hitting completely. Yeah... Turns out going back from 8000 Hz to 1000 is like shooting yourself in the foot. Unexpectedly for me.

I would also like to add that the gyroscope, which is responsible for shooting from the hip (the default value of 5) is now set to 0. The effect is about as if you were playing cs with mouse acceleration turned on (5 in the first column), and then suddenly turned it off (0 in the same column).

The second gyro (which has a default value of 55) makes no sense to touch if you, like me, do not want to dig into the game configs. Moreover, I can't say for sure, but it doesn't look like it's completely disabled even with the config set to 0. More like 10 in the game or so.

[Jimmie Awesome]

I suspect this effect is present in the game, but it is little noticeable if you use a simpler gaming mouse and play with the standard gyro settings (in fact - enabled acceleration). I have no more ideas, as the problem already occurs on the second computer. Different (licensed) versions of windows 10 and cardinally different hardware.