Dakota Mackinnon Posted April 6, 2016 Posted April 6, 2016 they recently updated the sens settings in this game wiz, maybe take another look as there are now aimed and scoped sliders
Wizard DPI Wizard Posted April 7, 2016 Author Wizard Posted April 7, 2016 they recently updated the sens settings in this game wiz, maybe take another look as there are now aimed and scoped sliders I will! Dakota Mackinnon 1
Dakota Mackinnon Posted May 10, 2016 Posted May 10, 2016 surprised there isn't being more interest shown lol
HnKi Posted July 23, 2016 Posted July 23, 2016 Bump for checking the mouse sensitivity settings again. I've also tested my cm/360 in game and there appears to be a slight discrepancy from what the calculator predicts (+-0.5 inches/360 per 1 percent in game), but there's a lot of uncertainty from measurement techniques and the slider.
ygdrad Posted November 22, 2016 Posted November 22, 2016 (edited) The calculator says I need 2.4% sensitivity, but only mentions how to reliably change it by 5%. After testing, it seems 5% on the sensitivity bar can be further broken down into 15 different settings for 0.33 repeating percent per smallest change on the bar. Might want to lock the calculator's result to thirds of a percent and show the discrepancy from there. The results from the calculator also seem to be off by a fair amount on my end. Edited November 22, 2016 by ygdrad
Wizard DPI Wizard Posted December 4, 2016 Author Wizard Posted December 4, 2016 Added aim sensitivity and updated the formula slightly. Don't have a scoped gun though, so haven't been able to add that yet.
Dakota Mackinnon Posted February 19, 2017 Posted February 19, 2017 The game has once again updated the mouse input, it now has numbers with an input field.
Nielser Posted August 26, 2017 Posted August 26, 2017 This needs an update, calculator doesn't work at all anymore for current Warframe version.
Wizard DPI Wizard Posted August 27, 2017 Author Wizard Posted August 27, 2017 On 8/26/2017 at 9:16 PM, Niels van Beusekom said: This needs an update, calculator doesn't work at all anymore for current Warframe version. Tested hipfire and aim now, and they seem to be good. What specifically is not working for you?
Nielser Posted August 27, 2017 Posted August 27, 2017 Well first of all you can't put in decimals anymore, so you can't make it perfectly accurate. And other than that, for me aim sens was waaaaaaaaaaaay too high and I checked multiple times if I calculated it correctly. Right now it's fine for me, not perfect but I managed to manually get it pretty close. This is a very popular f2p game tho so I think lots of people would benefit from having a good calculator in the long run. I'm not sure if it's possible though, I don't think it's possible anymore to put in decimals. Which seems like a huge failure on the design part of a big shooter game.
Wizard DPI Wizard Posted October 30, 2017 Author Wizard Posted October 30, 2017 12 minutes ago, 01810103 said: why?help me.thanks This means that the calculated sensitivity for Warframe is below 0, i.e. too low. The only way to solve this is to lower your DPI.
CopperCn Posted May 5, 2018 Posted May 5, 2018 May you check the aim sens again? Since I noted it is now definitely wrong somehow ...
Wizard DPI Wizard Posted May 6, 2018 Author Wizard Posted May 6, 2018 1 hour ago, CopperCn said: May you check the aim sens again? Since I noted it is now definitely wrong somehow ... What exactly are you testing? I suspect different aspect of the game might behave differently.
CopperCn Posted May 6, 2018 Posted May 6, 2018 45 minutes ago, DPI Wizard said: What exactly are you testing? I suspect different aspect of the game might behave differently. So basically my 30cm/360 turn rate. When I used 75% MM to match the look sens and aim sens, it would take 60.8cm to turn 360... However I tested in game, it is obviously higher than I expected.
Sandros94 Posted May 13, 2018 Posted May 13, 2018 Actually I noticed too that warframe calculated sens is way off, even measuring cm/360
Wizard DPI Wizard Posted May 13, 2018 Author Wizard Posted May 13, 2018 6 minutes ago, Sandros94 said: Actually I noticed too that warframe calculated sens is way off, even measuring cm/360 What is you sensitivity, expected 360 and measured 360? Also how/where do you test? I'm getting the same results as always when I test 360 distance.
Sandros94 Posted May 13, 2018 Posted May 13, 2018 10 minutes ago, DPI Wizard said: What is you sensitivity, expected 360 and measured 360? Also how/where do you test? I'm getting the same results as always when I test 360 distance. Now that you mentioned "where" everything make sense, I feel kinda stupid sorry ahahah I totally forgot that in this game FOV changes the sens, so when you are at a releay under some speed buffs your fov changes. I redid some test right now on the plains (alone) and measuring my 360 I get my 40cm as I have to (400dpi, 75fov, 2 ingame sens), so it just comes down to the "bad" sens implementation of the game right?
The Archlich Posted May 19, 2018 Posted May 19, 2018 ADS sensitivity calculation is extremely off. It end up over 6 times faster than it was meant to be.
Isegrim Posted April 5, 2020 Posted April 5, 2020 Could you take another look at Warframe? They've added railjack to the game and that mode has a completely different slider sensitivity than anything else in the game.
Wizard DPI Wizard Posted April 5, 2020 Author Wizard Posted April 5, 2020 2 hours ago, Isegrim said: Could you take another look at Warframe? They've added railjack to the game and that mode has a completely different slider sensitivity than anything else in the game. How do I access it? I have 0 progression in this game.
Isegrim Posted April 5, 2020 Posted April 5, 2020 vor 3 Stunden schrieb DPI Wizard: How do I access it? I have 0 progression in this game. Do you need access to that portion of the game? I can give you my WF login data if that's the case.
Wizard DPI Wizard Posted April 5, 2020 Author Wizard Posted April 5, 2020 Just now, Isegrim said: Do you need access to that portion of the game? I can give you my WF login data if that's the case. That would be great! I'll take a look at it tomorrow, PM me the details and how to access it
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now