trouble converting R6 sens to MW sens using "all" aim

[ErebusR6]

When I convert my R6 sens to Cod MW using all aim, I think it got the hipfire down right but the ADS is way too slow.

I might be dumb because I still don't know how to work the calculator settings after reading the instructions but I do see that it is affecting the sensitivity.

I'm really new to this but all help would be appreciated. Thanks!

[DPI Wizard]

2 minutes ago, StealthinDaBetter said:

When I convert my R6 sens to Cod MW using all aim, I think it got the hipfire down right but the ADS is way too slow.

I might be dumb because I still don't know how to work the calculator settings after reading the instructions but I do see that it is affecting the sensitivity.

I'm really new to this but all help would be appreciated. Thanks!

R6 is unfortunately a terrible game to use as base for your conversions since none of the ADS or scopes scale in a logical manner. It can be done however, but you need to make a choice as to what aim you want converted to the other game. You need to adjust the conversion setup to match your settings, what is all of your R6 settings and what do you want to base the conversion off of?

[ErebusR6]

1 hour ago, DPI Wizard said:

R6 is unfortunately a terrible game to use as base for your conversions since none of the ADS or scopes scale in a logical manner. It can be done however, but you need to make a choice as to what aim you want converted to the other game. You need to adjust the conversion setup to match your settings, what is all of your R6 settings and what do you want to base the conversion off of?

The choice of conversions you're talking about is hipfire, ads, or scope right?

[DPI Wizard]

12 hours ago, StealthinDaBetter said:

The choice of conversions you're talking about is hipfire, ads, or scope right?

More specific, since R6 scales everything differently you need to choose if you want ADS Ironsight, ACOG, Glaz Flip Sight or one of the CSRX zooms converted to the aims in MW. They all scale very differently, so it will make a huge difference.

[ErebusR6]

3 hours ago, DPI Wizard said:

More specific, since R6 scales everything differently you need to choose if you want ADS Ironsight, ACOG, Glaz Flip Sight or one of the CSRX zooms converted to the aims in MW. They all scale very differently, so it will make a huge difference.

I now get what you're saying by choosing, so how would I align my ADS ironsight to the cod MW sights? Because if I do this, now my hipfire sens is different.

[DPI Wizard]

2 hours ago, StealthinDaBetter said:

now my hipfire sens is different.

That's because you are converting from ADS to everything. You should in most cases always use the "All" aim (or hipfire when there's no "All") to convert from. Then adjust the conversion settings so the aims matches your game settings. Like this, where the ADS and scope setup is adjusted so the calculated ADS sensitivity matches your setting of 80. Then this is used to calculate the aims in MW.

https://www.mouse-sensitivity.com/?share=f21730da5f51104c157e10ce36834a5b

[fortunate reee]

4 hours ago, StealthinDaBetter said:

I now get what you're saying by choosing, so how would I align my ADS ironsight to the cod MW sights? Because if I do this, now my hipfire sens is different.

 

1 hour ago, DPI Wizard said:

That's because you are converting from ADS to everything. You should in most cases always use the "All" aim (or hipfire when there's no "All") to convert from. Then adjust the conversion settings so the aims matches your game settings. Like this, where the ADS and scope setup is adjusted so the calculated ADS sensitivity matches your setting of 80. Then this is used to calculate the aims in MW.

https://www.mouse-sensitivity.com/?share=f21730da5f51104c157e10ce36834a5b

just to not this since you are setting it to 360 distance

match the hipfire fov

[ErebusR6]

1 hour ago, fortunate reee said:

 

just to not this since you are setting it to 360 distance

match the hipfire fov

I'm assuming the fov you're talking about is the one in MW

The closest I could get to my R6 fov is 116.012 and that should be my sens right?

[fortunate reee]

3 minutes ago, StealthinDaBetter said:

I'm assuming the fov you're talking about is the one in MW

The closest I could get to my R6 fov is 116.012 and that should be my sens right?

wym the closest just use auto fov

set it to  84vdeg and you are set (if you cant hit that in  cod lower your siege fov  )

[ErebusR6]

3 hours ago, fortunate reee said:

wym the closest just use auto fov

set it to  84vdeg and you are set (if you cant hit that in  cod lower your siege fov  )

Oh, i get it now. Thanks