BF3 to BF4 (ADS sens conversion)

[Insido]

Hello dudes, I played for many years in BF3 and would like to convert ADS (Iron sight, Reflex, Kobra) to BF4 for 1X (Coyote, HD-33, Holo, Kobra, PKA-S, Reflex) with same feeling, but I had problems with this, standard value in BF4 is zoom sens - 100%, for me it feels slowly, it is coefficient 0.6 multiplied by sensitivity from hipfire, BF3 have a 0.5 coefficient for RDS, I also tried to use "uniform soldier aiming" (USA) at different coefficients 0% / 100% / 133% / 178% they all almost didn’t differ in sens, everything is also faster than in bf3 , I think I need something between 100% of zoom sens and USA, perhaps a coefficient of 0.7-0.8 (117% -133%) for zoom sens judging by my feelings, I also use "FOV scaling in ADS" - on, so BF3 have big zoom in RDS it's fixed fov hor+ 51.77 for 4:3 ratio or fov 40 vert-, and in bf4 I have a minimal zoom in RDS near what I use for hipfire, in both games I have same fov for hipfire it's 100 for BF3 (because this game use hor fov for 4:3 ratio) and in BF4 fov set to 84 (hor+ 100) I want to combine these 2 games.

My conversion and settings what I use:

All conversions give me high ADS sens faster than I have for hipfire, except 360 distance beetwen this games it's give me 0.833333 for BF4 and this super slow, I know what in BF4 close range sensitivity 1.666667 (167%) it's 1:1 to hipfire for 360 distance and I can't going with higher multiplier than this, also  need to consider a small zoom in ADS, USA give me it's around 152-154% for 1:1 feeling but this fast after BF3, help me guys.

P.S.: sorry for bad english, it's not native language for me

Edited December 16, 2019 by Insido

[fortunate reee]

11 minutes ago, Insido said:

Hello dudes, I played for many years in BF3 and would like to convert ADS (Iron sight, Reflex, Kobra) to BF4 for 1X (Coyote, HD-33, Holo, Kobra, PKA-S, Reflex) with same feeling, but I had problems with this, standard value in BF4 is zoom sens - 100%, for me it feels slowly, it is coefficient 0.6 multiplied by sensitivity from hipfire, BF3 have a 0.5 coefficient for RDS, I also tried to use "uniform soldier aiming" (USA) at different coefficients 0% / 100% / 133% / 178% they all almost didn’t differ in sens, everything is also faster than in bf3 , I think I need something between 100% of zoom sens and USA, perhaps a coefficient of 0.7-0.8 (117% -133%) for zoom sens judging by my feelings, I also use "FOV scaling in ADS" - on, so BF3 have big zoom in RDS it's fixed fov hor+ 51.77 for 4:3 ratio or fov 40 vert-, and in bf4 I have a minimal zoom in RDS near what I use for hipfire, in both games I have same fov for hipfire it's 100 for BF3 (because this game use hor fov for 4:3 ratio) and in BF4 fov set to 84 (hor+ 100) I want to combine these 2 games.

My conversion and settings what I use:

All conversions give me high ADS sens faster than I have for hipfire, except 360 distance beetwen this games it's give me 0.833333 for BF4 and this super slow, I know what in BF4 close range sensitivity 1.666667 (167%) it's 1:1 to hipfire for 360 distance and I can't going with higher multiplier than this, also  need to consider a small zoom in ADS, USA give me it's around 152-154% for 1:1 feeling but this fast after BF3, help me guys.

P.S.: sorry for bad english, it's not native language for me

if i understood u.s.a correctly they swapped over from 75% hor (or archaic numbers )bf3 to 100%hor with bf4 you might be able to just 

i would not recommend going for the same 360 distance (besides of hipfire)

 

id use 0% for scope and ads and match the hipfire fov 

give this thread a look if you haven't  

 

Edited December 16, 2019 by fortunate reee

[Insido]

11 минут назад, fortunate reee сказал:

если я правильно понял США, они поменялись местами с 75% hor bf3 до 100% hor с bf4, и вы могли бы просто 

я не рекомендовал бы идти на то же расстояние 360 (кроме hipfire)

посмотрите эту ветку, если у вас нет 

 

Thx for fast answer, yes I tried MDH/MDV 0% for ADS from hipfire FOV and this work good, but not after BF3 zoom rds sens feeling little bit fast for me 

 

[fortunate reee]

2 minutes ago, Insido said:

Thx for fast answer, yes I tried MDH/MDV 0% for ADS from hipfire FOV and this work good, but not after BF3 zoom rds sens feeling little bit fast for me 

 

i would recommend using the all method for bf4 

[Insido]

1 минуту назад, fortunate reee сказал:

i would recommend using the all method for bf4 

Yes this same what doing USA for 0% (vertical coefficient) in BF4