Wizard DPI Wizard Posted August 11, 2019 Author Wizard Posted August 11, 2019 Just now, Paintballer said: Quick question. I have a 16:10 1440 monitor and I have the apex FOV at standard. What is R6 FOV calc based on? And what value would match Apex base value on my monitor. FOV calculations are based on the resolution you enter. Your desktop resolution is auto-detected and used as placeholder values you can change. You will see the "Actual VFOV" in the output for Apex, this is the value you should use in R6 to get the same FOV.
Paintballer Posted August 11, 2019 Posted August 11, 2019 (edited) Also what's the deal with the 4 sensitivities in R6 the two base values of 50 then the actual multipliers which the calc spits out. Just realised this is a bit off topic for apex chat. Apologies. Ok got you. Silly question but is it always best to match FOVs across games before getting the sens matched? I am thinking if I change the FOV now for R6 to match Apex., It's going to throw my sensitivity off? Edited August 11, 2019 by Paintballer
Wizard DPI Wizard Posted August 11, 2019 Author Wizard Posted August 11, 2019 4 minutes ago, Paintballer said: Also what's the deal with the 4 sensitivities in R6 the two base values of 50 then the actual multipliers which the calc spits out. Just realised this is a bit off topic for apex chat. Apologies. All the values are needed to calculate the sensitivity. You can perfectly well use the default values of 50, but it's important to enter whatever values you use the config file.
Althir81 Posted September 1, 2019 Posted September 1, 2019 Hey, is there a way to the same mousefeeling for different fov?! like 110 in apex to max 103 Overwatch. The same 360 distance is the same, but it feels different because the fov. regards
fortunate reee Posted September 1, 2019 Posted September 1, 2019 (edited) 1 hour ago, Althir81 said: Hey, is there a way to the same mousefeeling for different fov?! like 110 in apex to max 103 Overwatch. The same 360 distance is the same, but it feels different because the fov. regards 0%monitor distance is pretty much what you are looking for it is the same 360 if the fov is the same but scales when the fov changes faster with bigger fov slower with tighter fov (mind overwatch is a bad game because its inputs are limited to 2 digits and it has crazy delay/feels like vsync without vsync) Edited September 1, 2019 by fortunate reee
SrirachaSauce Posted September 2, 2019 Posted September 2, 2019 Apex --> Siege I did the conversion of apex to siege but the fov on r6 feels really really wrong in game, it creates a not good feeling fish eye affect at 90 and the fov slider stops at 90. The default fov for r6 is 60. I am just trying to get the same level of sensitivity across games while using a comfortable fov for r6 to where I wont notice it discrepancies when I use my aim trainers (Aimlab) (aimhero)(Kovaaks)
philheath Posted September 3, 2019 Posted September 3, 2019 @DPI Wizard apex legends new update has individual scope sliders now
Wizard DPI Wizard Posted September 3, 2019 Author Wizard Posted September 3, 2019 1 minute ago, philheath said: @DPI Wizard apex legends new update has individual scope sliders now About time! Looking into it now Tehstool and aksu 1 1
AntonLFG Posted September 3, 2019 Posted September 3, 2019 Take your time... Because when the calculator update drops I'll run out of excuses as to why I potato my longbow shots so hard.
Althir81 Posted September 3, 2019 Posted September 3, 2019 did the new setting also affect the ironsight ads!? for each "category" or?!
Wizard DPI Wizard Posted September 3, 2019 Author Wizard Posted September 3, 2019 The new settings doesn't work yet! At least not when I try in training mode. It's still only the 1x Scope / Iron Sight setting that affects the scopes, and it seems to scale differently than before. I assume this is just bugged at the moment...
Wizard DPI Wizard Posted September 3, 2019 Author Wizard Posted September 3, 2019 Can anyone else confirm this? Get a scope and try setting the scope sensitivity to an extreme like 0.2 or 10 and see if it's affected.
Althir81 Posted September 3, 2019 Posted September 3, 2019 even if u picked up the kraber and try the 5x and 10x zoom?
Wizard DPI Wizard Posted September 3, 2019 Author Wizard Posted September 3, 2019 1 minute ago, Althir81 said: even if u picked up the kraber and try the 5x and 10x zoom? 6x and 10x IIRC, but yes. No difference when adjusting the scope power sensitivity, only when adjusting the 1x.
Althir81 Posted September 3, 2019 Posted September 3, 2019 (edited) awesome respawn xD, i'll write something on reddit for this Edited September 3, 2019 by Althir81
Tehstool Posted September 3, 2019 Posted September 3, 2019 3 minutes ago, DPI Wizard said: Can anyone else confirm this? Get a scope and try setting the scope sensitivity to an extreme like 0.2 or 10 and see if it's affected. I tried the kraber and the sensitivity didn't work. Also on a slightly unrelated note, isn't the r301 iron sights between 1-2x? Is that just going to be unbalanced?
aksu Posted September 3, 2019 Posted September 3, 2019 (edited) 13 minutes ago, DPI Wizard said: The new settings doesn't work yet! At least not when I try in training mode. It's still only the 1x Scope / Iron Sight setting that affects the scopes, and it seems to scale differently than before. I assume this is just bugged at the moment... I tried it in game and it worked, atleast for the 2x scope (set it to 7.0) to be sure. Edited September 3, 2019 by aksu
Wizard DPI Wizard Posted September 3, 2019 Author Wizard Posted September 3, 2019 Just now, aksu said: I tried it in game at it worked, atleast for the 2x scope (set it to 7.0) to be sure. Ok, it might work for some scopes then, or maybe not in training. I'll check some more.
Wizard DPI Wizard Posted September 3, 2019 Author Wizard Posted September 3, 2019 Since the old settings are broken anyway, I've updated the calculator to what it most likely should be with scope settings based on how the sensitivity works. But do note that this isn't properly tested yet. It might be that only 1x affect some/all scopes, but any feedback is appreciated!
Tehstool Posted September 3, 2019 Posted September 3, 2019 It's telling me to use 1 for every setting. Am I doing it right?
Wizard DPI Wizard Posted September 3, 2019 Author Wizard Posted September 3, 2019 Just now, Tehstool said: It's telling me to use 1 for every setting. Am I doing it right? If using MDH 0% then yes. That's how it scales.
Tehstool Posted September 3, 2019 Posted September 3, 2019 Oh ok thanks. I guess I just thought the numbers would be different.
AntonLFG Posted September 3, 2019 Posted September 3, 2019 It seems like the game resets the values in the config file upon launch for some reason. Might be a factor in why some optics don't work.
Wizard DPI Wizard Posted September 3, 2019 Author Wizard Posted September 3, 2019 Just now, GolldenFalcon said: It seems like the game resets the values in the config file upon launch for some reason. Might be a factor in why some optics don't work. Mine kept the config file values in-game. Tried changing them in-game too though, no difference
SHADYau Posted September 3, 2019 Posted September 3, 2019 Respawn are terrible, battlefield has the best sensitivity adjusting system. If you don't want the config to reset, you make both the files (sorry on phone and forgot there names, local and another if I can recall) in the folder READ ONLY in properties
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now