adealex416 Posted October 12, 2018 Posted October 12, 2018 (edited) Hello, this is the first time i use this tool and seems like the result is quite strange. Am i doing it wrong? Edited October 12, 2018 by adealex416
Wizard DPI Wizard Posted October 12, 2018 Author Wizard Posted October 12, 2018 2 hours ago, stereo3D said: i'm getting an incorrect ADS multiplier: MDH 100 %, 47 cm, DPI 1000, FOV 100 mouse_sensitivity = "2.9452" mouse_ads_monitor_distance_coefficient = "1.7778" mouse_ads_yaw_ads_multiplier = "0.8619" <--- should be "1" Fixed now, quite a lot of changes since beta!
passthepeas Posted October 12, 2018 Posted October 12, 2018 I have the same sens for Overwatch and Quake Champions, and yet I get different results for each. In actuality, default 1.0 in BO4 seems equal to 1.0 in Quake, and 50 relative in OW, but the converter tells me to set BO4 to 1.62 when converting from OW
Wizard DPI Wizard Posted October 12, 2018 Author Wizard Posted October 12, 2018 3 minutes ago, passthepeas said: I have the same sens for Overwatch and Quake Champions, and yet I get different results for each. In actuality, default 1.0 in BO4 seems equal to 1.0 in Quake, and 50 relative in OW, but the converter tells me to set BO4 to 1.62 when converting from OW Are you sure you are selecting BO4 and not BO3? BO4 is totally different to Quake Champions, but close to OW. Either way, the different FOV's of the games and you conversion method may make the end result different.
stereo3D Posted October 12, 2018 Posted October 12, 2018 1 hour ago, DPI Wizard said: Fixed now, quite a lot of changes since beta! sry, but nothing changed for me?
Wizard DPI Wizard Posted October 12, 2018 Author Wizard Posted October 12, 2018 9 minutes ago, stereo3D said: sry, but nothing changed for me? Like this that didn't work for you?
stereo3D Posted October 12, 2018 Posted October 12, 2018 seems like it's only wrong for ADS FOV "independent".
Wizard DPI Wizard Posted October 12, 2018 Author Wizard Posted October 12, 2018 22 minutes ago, stereo3D said: seems like it's only wrong for ADS FOV "independent". Now it works stereo3D 1
Wizard DPI Wizard Posted October 12, 2018 Author Wizard Posted October 12, 2018 There will likely be minor adjustments to the ADS sensitivity the coming days btw, as I get more data in.
GLvDOS Posted October 12, 2018 Posted October 12, 2018 46 minutes ago, DPI Wizard said: There will likely be minor adjustments to the ADS sensitivity the coming days btw, as I get more data in. Thanks for keeping up with this! Looking forward to the updates.
Wizard DPI Wizard Posted October 12, 2018 Author Wizard Posted October 12, 2018 Just now, nodicaL said: Thanks for keeping up with this! Looking forward to the updates. No problem! What will happen the next days is that I'll try to add more scopes, not just a generic ADS. Current ADS is based on Reflex. Since you have full control over the monitor distance coefficient it's quite frankly not that useful, but some people might want to know the FOV and other stuff about the different scopes. But most importantly I need to perfect the FOV calculations for the reflex sight (it's off by about 0.0X% now) Seems like the devs at every CoD game are throwing darts in the dark to figure out the FOV of different things...
etienne00123 Posted October 12, 2018 Posted October 12, 2018 Anyone experiencing mouse input lag? I've forced Vsync off in the Nvidia control panel, max pre-rendered frames to 1 and i'm getting more than 110 fps but the mouse still feels sluggish.
Drimzi Posted October 13, 2018 Posted October 13, 2018 It's just the game I suppose. Black Ops 3 had the option to fix the mouse input lag, but it completely killed the FPS. This was the variable in the config. Quote //0 use two threads, one thread update frame N while the second render N-1. 1 concatenate update and render. 2 concatenate update render and frame presentation. //0 is the default for the best performance, 1 and 2 improve latency but require a powerful CPU. SerializeRender = "0" // 0 to 2
GLvDOS Posted October 13, 2018 Posted October 13, 2018 (edited) 6 hours ago, etienne00123 said: Anyone experiencing mouse input lag? I've forced Vsync off in the Nvidia control panel, max pre-rendered frames to 1 and i'm getting more than 110 fps but the mouse still feels sluggish. No, I don't notice any input lag in BO4. Aiming feels really good in this game as well. I'm getting consistent 160+ FPS though... Edited October 13, 2018 by nodicaL
stereo3D Posted October 13, 2018 Posted October 13, 2018 11 hours ago, etienne00123 said: Anyone experiencing mouse input lag? I've forced Vsync off in the Nvidia control panel, max pre-rendered frames to 1 and i'm getting more than 110 fps but the mouse still feels sluggish. then cap your fps at 110 with RTSS.
minimoe Posted October 13, 2018 Posted October 13, 2018 Why does the Ads value change when you enter the fov?
Wizard DPI Wizard Posted October 13, 2018 Author Wizard Posted October 13, 2018 2 minutes ago, minimoe said: Why does the Ads value change when you enter the fov? It depends on you settings actually, if your conversion setup matches the Monitor Distance Coefficient it will not change if you are converting directly to ADS. If you convert using All it also depends on the hipfire conversion setup.
minimoe Posted October 13, 2018 Posted October 13, 2018 (edited) Alright but this should be fine? Before you commented i saw how messed up the fov is. Even if you have it on independed for ads. Changing FOV still affects ADS sensitivity for some reason. Edited October 13, 2018 by minimoe
justinovish Posted October 13, 2018 Posted October 13, 2018 (edited) Hi say I use a sensitivity of 1@800dpi and zoom_sensitivity_ratio of 0.8 in CSGO what should I use for ADS settings in BO4 to get the closest possible match? Not sure if it matters but I also play csgo @ 1920x1080 Edited October 13, 2018 by justinovish
Wizard DPI Wizard Posted October 13, 2018 Author Wizard Posted October 13, 2018 8 minutes ago, minimoe said: Alright but this should be fine? Before you commented i saw how messed up the fov is. Even if you have it on independed for ads. Changing FOV still affects ADS sensitivity for some reason. It's because the sensitivity (both hipfire and ADS) are matched to your input, i.e. Overwatch. So when you change FOV, the ADS sensitivity will change because the ADS FOV also changes. Hipfire stays the same because hipfire sensitivity is unaffected by FOV change.
minimoe Posted October 13, 2018 Posted October 13, 2018 4 hours ago, DPI Wizard said: It's because the sensitivity (both hipfire and ADS) are matched to your input, i.e. Overwatch. So when you change FOV, the ADS sensitivity will change because the ADS FOV also changes. Hipfire stays the same because hipfire sensitivity is unaffected by FOV change. Thanks for the very good explanation. Now that i used monitor distance instead of 360 for hipfire it made my life a lot easier.
Its_My_Purpose Posted October 13, 2018 Posted October 13, 2018 Can someone help me convert my PubG sensitivity to BO with a focus on aimed accuracy and muscle memory. I don't want playing BO to hurt my PubG.
Wizard DPI Wizard Posted October 14, 2018 Author Wizard Posted October 14, 2018 Adjusted ADS FOV calculations slightly and added scope!
stereo3D Posted October 14, 2018 Posted October 14, 2018 43 minutes ago, DPI Wizard said: Adjusted ADS FOV calculations slightly and added scope! so reflex is basically FOV 50 at 4:3. looks like they are still working with 4:3 internally. i guess, ELO/ironsights could be 55 and holo 45 at 4:3?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now