Tom Clancy's Rainbow Six Siege

[SMGTD]

Test server's up today if that helps at all

[DPI Wizard]

2 hours ago, crowcrowcrow said:

Can we get a update for the new upcoming 3.5x changes?

Working on it 

[DPI Wizard]

3 hours ago, crowcrowcrow said:

Can we get a update for the new upcoming 3.5x changes?

The 3.5x is just the 4x renamed, and it's still the 4x in the config file. Other than that everything else is the same except for the removal of 1.5x, 2x and 3x.

I'll keep them in the calculator for now in case someone wants to know what their previous sensitivity was.

[crowcrowcrow]

Is there anyway to adjust the mouse pitch sensitivity?

 

Spoiler

Also I'm unsure how to do these conversions from 1.5x -> 2.0x

https://www.mouse-sensitivity.com/?share=cb679ae7e6f3fa97fdc9b93a9c3311fa

I'm positive something is wrong judging by the fov values.

 

Edited March 8, 2024 by crowcrowcrow

[DPI Wizard]

3 hours ago, crowcrowcrow said:

Is there anyway to adjust the mouse pitch sensitivity?

The pitch sensitivity is affected by the Y Scale configuration in the calculator settings.

It defaults to be the same as the X sensitivity.

However, you have entered 4.1 as yaw sensitivity, but this sensitivity does not support decimals. The same goes for the pitch sensitivity, so it is rounded down to 4.

[Needfor940]

Hi! Could someone give me the MDV? 177% of ADS and Scope?

[LeopardTurret]

1 hour ago, Needfor940 said:

Hi! Could someone give me the MDV? 177% of ADS and Scope?

What's your hipfire sens and mouse DPI?

[Needfor940]

1 minute ago, LeopardTurret said:

What's your hipfire sens and mouse DPI?

400dpi/8-8

[LeopardTurret]

2 minutes ago, Needfor940 said:

400dpi/8-8

Oh yea I forgot; I need your FOV too

[Needfor940]

16 minutes ago, LeopardTurret said:

Oh yea I forgot; I need your FOV too

oh yes, logical :'D

87fov

[LeopardTurret]

3 minutes ago, Needfor940 said:

oh yes, logical :'D

87fov

I'm not sure if you meant 178% MDV (because that's the more common one), but regardless, the calculation for 177% and 178% end up being the same result anyway.

 

[Needfor940]

1 hour ago, LeopardTurret said:

Nem vagyok benne biztos, hogy a 178%-os MDV-re gondoltál (mert ez a gyakoribb), de ettől függetlenül a 177%-os és a 178%-os számítás végülis ugyanazt az eredményt adja.

 

Yes, that's what I thought. Thank you so much

[Audenian]

Le 08/04/2024 à 20:32, LeopardTurret a dit :

I'm not sure if you meant 178% MDV (because that's the more common one), but regardless, the calculation for 177% and 178% end up being the same result anyway.

 

How du u had this resulat for ads ? it was what i looking for to have a constant aiming between scope and having same feeling. I put the same as you in te calculatour but all my scope are at "50". And your result are good because i did my R6 sens with my hand "feeling" and my scope ADS is very near your calculator result. I search an option to put a coefficient like 1.77 or 1.33 but i don't found it.

Edited April 27, 2024 by Audenian

[LeopardTurret]

5 hours ago, Audenian said:

How du u had this resulat for ads ? it was what i looking for to have a constant aiming between scope and having same feeling. I put the same as you in te calculatour but all my scope are at "50". And your result are good because i did my R6 sens with my hand "feeling" and my scope ADS is very near your calculator result. I search an option to put a coefficient like 1.77 or 1.33 but i don't found it.

At the top of the calculator, make sure the mode is on 'Default' or 'Advanced' and enter '178' in the Monitor Distance - Vertical section. Also, don't forget to input your R6 Siege FOV in the calculator or else the ADS results will be wrong. 

[SeikoPotato]

Something seems to be wrong with 360 ads conversion. If I use these settings, Kovaak's sensitivity matcher would be slightly slower. If I change ADSMouseMultiplierUnit to 0.016780 however, the sensitivity matches. Am I using the calculator incorrectly? 

[DPI Wizard]

5 hours ago, SeikoPotato said:

Something seems to be wrong with 360 ads conversion. If I use these settings, Kovaak's sensitivity matcher would be slightly slower. If I change ADSMouseMultiplierUnit to 0.016780 however, the sensitivity matches. Am I using the calculator incorrectly? 

I just tested these exact settings, and the calculations are spot on with the Red Dot A sight at least.

What sight and weapon are you testing with? And is your FOV set to 73.739792?

[SeikoPotato]

17 hours ago, DPI Wizard said:

I just tested these exact settings, and the calculations are spot on with the Red Dot A sight at least.

What sight and weapon are you testing with? And is your FOV set to 73.739792?

Oh I just tested with that FOV and it tested correctly.

I assumed FOV wouldn't affect sensitivity since the calculator mentioned it wouldn't. It didn't occur to me that that would change when ADS'd

Thanks for this

[SMGTD]

FOV only affects Sensitivity slightly while ADSed, Hipfire is completely unaffected by FOV.

[Juiice_OJ]

Is it possible to have 1.5x scope added to legacy or kept on a old version selection with current 1.0 and 2.5? would like to test old sensitivities and convert.

[DPI Wizard]

1 hour ago, Juiice_OJ said:

Is it possible to have 1.5x scope added to legacy or kept on a old version selection with current 1.0 and 2.5? would like to test old sensitivities and convert.

I've added a new "Pre Y9S1" special option for these, and renamed the previous "Old" one "Pre Y5S3". Hope this works for you