R6S to CSGO

[rasser11]

So I wanna convert my R6 sens to CSGO and I want it to be as close as possible while I'm ads with iron sight and acog , but I don't know which 1 to use, 360 distance, viewspeed or monitor distance? Just straight up the best 1 that gives me the most precise conversion.

Thx 

Edited January 28, 2018 by rasser11
Want to type more in depth

[potato psoas]

There isn't a "best method" because of distortion on the monitor. But the two "best" methods are 0% MM and 100%MM. 0%MM matches at the crosshair and 100%MM matches at the edge of the monitor. If that confuses you then you should watch this video explaining what monitor matching is:

Although, the problem with 100%MM is that it's aspect-ratio dependent, which means you get different results using different aspect ratios. This isn't that big of a problem but if you think it is you can use 100%MM but for the vertical FOV, which you can calculate by dividing your vertical by your horizontal (horizontal:vertical), e.g. if your aspect ratio is 16:9, the 100%MM for your vertical FOV would be 9/16 = 56.25%MM.

You can of course pick whatever monitor match percentage you like, or even use Viewspeed. It all depends on what you prefer to use. Personally I use 0% MM because I prefer to match at the crosshair.